The SB shear beam load cell has excellent linearity and precision, excellent resistance to lateral loads of over 50% and has been designed for weighing hoppers and tanks and for constructing low-profile platforms. If used with the MH MOUNTING KIT mounting accessory it avoids the use of mechanical constraints. The SB cell is also equipped with watertight protection to work in severe environmental conditions and is available in a special high temperature version. PWS: 11/2018
Technical Specifications in PDF
| Rated load (RL): 75, 125, 250 Kg |
| Combined error: ±0.025 % RO |
| Repeatability: ± 0.01 % RO |
| Creep (20 minutes): ±0.03 % RO |
| Safe overload: 150 % RL |
| Ultimate overload: 300 % RL |
| Clamping force without any load: 75 Nm |
| Material: Stainless steel |
| Degree of protection: IP65 |
| Deflection: < 0.5 mm |
| Compensated Temperature: -10 ÷ +40 °C |
| Temperature range: -20 ÷ +70 °C |
| Temperature effect on zero balance: ±0.005 % RO/5°C |
| Temperature effect on output: ±0.005 % load/5°C |
| Rated output RO: 3 mV/V ±0.25 % |
| Zero balance: ±1 % RO |
| Insulation resistance: >2000 M Ohm |
| Input resistance: 350 ±3 Ohm |
| Output resistance: 350 ±3 Ohm |
| Recommended input: 5 ÷ 15 Vdc/ac |
deutsch
français
español
italiano
हिन्दी
